CarBit ELM327 OBD2 APK
An OBD 2 engine ECU diagnostics tool that uses a Wi-Fi/Bluetooth ELM327 adapter
Published by MDA VRP
171 Ratings61 CommentsAPK Details
| Category | Auto & Vehicles |
| Last Updated | 2018-10-20 |
| Latest Version | 3.2.4 |
| Size | 4.71 MB |
| Installations | 10000+ |
| Android version | 3.1 and up |
| Content Rating | Everyone |
Screenshots
CarBit ELM327 OBD2 APK Description
The application allows you to display data from various electronic vehicle blocks using the ELM327 OBDII adapter, display graphics in real time, and also save them and view them later, shows and Resets engine fault codes / DTC trouble codes.
Supports Bluetooth ELM327 and Wi-Fi ELM327 OBD adapters.
It is better to use adapters V1.5, to V2.1 a lot of complaints about incorrect work.
Attention!
ELM327 chips work only with cars with OBD2 support:
Cars manufactured in the USA since 1996,
In the Europe countries since 2001. (gasoline cars) and since 2003. (diesel),
In Japan, since ~ 2001.
In addition to standard OBDII parameters, special ones are supported, for different
car brands, the following options are now available:
BYD - 53 Items
Chery - 18 (DELPHI)
Citroen - 80 (C4,C5,Sagem2000)
Ford - 39
GM/Opel/Pontiac - 74
Honda - 26 (Fit, Accord)
KIA, Hyundai - ~15 for each model(ATF Temperature, Knock detected and etc)
Mitsubishi - 319 (CAN, MUT, MUT GDI)
Nissan - 423 (CAN,CONSULT2)
Renault - 185 (CAN, KWP, Sagem2000)
SsangYong - 47
Toyota - 466 (CAN, KWP, Prius)
VAZ - 172 (Yanvar 7.2, Itelma VS5.1 R83, Itelma M73, Itelma M74 KWP/CAN)
The list of models and parameters will be updated...
Not all PIDs from the list for a certain car brand can be supported by your car, for convenience you can select the types of the required PIDs in the "Settings / PID types"
For certain brands of cars (currently some Mitsubishi models), have the ability to control various systems (turn on a cooling fan, a gasoline pump, etc.)
To read the MUT parameters and control the actuators on Mitsubishi models with CAN bus(Montero/Pajero IV, Outlander 2, etc.), you need to create a profile with the ISO 9141-2 protocol, and in the remaining profiles (for reading CAN parameters) leave the protocol ISO 15765-4 CAN (11bit 500K) or automatically.
So there are ample opportunities for creating your own parameters.
Supports Bluetooth ELM327 and Wi-Fi ELM327 OBD adapters.
It is better to use adapters V1.5, to V2.1 a lot of complaints about incorrect work.
Attention!
ELM327 chips work only with cars with OBD2 support:
Cars manufactured in the USA since 1996,
In the Europe countries since 2001. (gasoline cars) and since 2003. (diesel),
In Japan, since ~ 2001.
In addition to standard OBDII parameters, special ones are supported, for different
car brands, the following options are now available:
BYD - 53 Items
Chery - 18 (DELPHI)
Citroen - 80 (C4,C5,Sagem2000)
Ford - 39
GM/Opel/Pontiac - 74
Honda - 26 (Fit, Accord)
KIA, Hyundai - ~15 for each model(ATF Temperature, Knock detected and etc)
Mitsubishi - 319 (CAN, MUT, MUT GDI)
Nissan - 423 (CAN,CONSULT2)
Renault - 185 (CAN, KWP, Sagem2000)
SsangYong - 47
Toyota - 466 (CAN, KWP, Prius)
VAZ - 172 (Yanvar 7.2, Itelma VS5.1 R83, Itelma M73, Itelma M74 KWP/CAN)
The list of models and parameters will be updated...
Not all PIDs from the list for a certain car brand can be supported by your car, for convenience you can select the types of the required PIDs in the "Settings / PID types"
For certain brands of cars (currently some Mitsubishi models), have the ability to control various systems (turn on a cooling fan, a gasoline pump, etc.)
To read the MUT parameters and control the actuators on Mitsubishi models with CAN bus(Montero/Pajero IV, Outlander 2, etc.), you need to create a profile with the ISO 9141-2 protocol, and in the remaining profiles (for reading CAN parameters) leave the protocol ISO 15765-4 CAN (11bit 500K) or automatically.
So there are ample opportunities for creating your own parameters.